The dual handle 10.5 Gallon Container is rotationally molded with a plastic composite material that is compatible with all types of fluids from water to fuels and most chemicals for long lasting portability
The FLO-FAST ™ 10.5 gallon container was designed for portable fluid transfer applications ranging from a variety of recreational uses and commercial purposes. The rotationally-molded polyethylene construction combined with dual handles make it ultra-functional and exceptionally durable; therefore it will hold up in any type of environment. The material is compatible with aqueous fluids, fuels, oils, and many types of chemicals. Our patent-pending technology of the brass air valve maximizes fluid flow, especially when utilized with the FLO-FAST ™ Pump System. Additionally, the FLO-FAST ™ container has a built-in handle on the bottom making it easier to grip and control when transporting. The FLO-FAST ™ 10.5 gallon can will provide the utility and function necessary for all your portable fluid and fuel transfer operations.
Dimensions: 11.5" x 11" x 32"
Container holds 10.5 gallons of fluid
Liquid level indicators in liters and gallons
Container is rotationally-molded which gives additional wall thickness throughout, making it ultra-durable and long-lasting
3 inch opening with solid-plastic cap and internal o-ring to provide maximum seal
Dual handle for ease in transport, grip, and handling
Molded-in, female brass insert, combined with male vent valve to provide ample airflow when utilizing the FLO-FAST ™ Pump
The FLO-FAST ™ Versa Cart holds 2 of the FLO-FAST ™ 10.5 containers
Designed and built to fit standard motorsport container (jug) holders inside toy/race haulers- 10.5 gallon containers will double your fluid capacity.
5 gallon container (jug)
Cap and internal o-ring
Brass air vent valve
Warranty & Safety
Steps the operator must take before Pumping or Drawing any volatile / combustible fluid
If you choose to pump or draw any type of flammable liquid do not use this pump or system around any flame or any type of electrical motor or devise that may cause a spark or static spark.
Always make sure the FLO-FAST pump and the container it is in, is placed on the ground before pumping or drawing any fluid.
Apply static wire clamp to the filler opening to reduce the risk of static.
Do not transfer any fuel with engine running, hot exhaust can ignite fuel.
Make sure the squeeze clamp is applied before transferring fluid. The squeeze clamp is to make sure the hose will stay in the filler opening.
Always keep the hose in contact with the filler opening. (After you have applied the squeeze clamp to the unit that you are pulling fluid from or pumping fluid into, the hose will stay in contact with the filler opening, therefore dissipating any static build up from the pump or system.)
If fuel is being transferred do not smoke or place the FLO-FAST pump or system by any type of flame.
Steps the operator must take when fluid transfer is complete
After a fluid transfer operation, carefully raise the line out of the fluid opening and let the fluid drain back into the system container. Do not set the hose down until all of the fluid has drained back into the container.
To eliminate any person from pumping fluid accidentally, DO NOT store the FLO-FAST pump in any type of portable jug. Always put the pump and system in a safe area where children / others do not have access to it.
Children must not use the FLO-FAST portable fluid transfer pump and system.
Do not transport the FLO-FAST pump while it is in the utility jugs.
After a fluid transfer operation, always remove FLO-FAST pump from container and place the cap on the utility jug.
Do not allow individuals under licensed age to use the FLO-FAST pump or system.
If you choose to use FLO-FAST with any type of volatile fluid like gasoline or methanol or any harmful chemical, do not inhale vapors.
If any component breaks on the FLO-FAST portable fluid transfer pump or system, do not use until you have replaced all of the broken components.
When filling containers at a gas station always place the container on the ground and never fill a container when it is in a trunk, in the bed of a truck, in a trailer, or on top of a vehicle. Do not overfill the container beyond manufacturer’s specified levels to allow for fluid expansion.
You can only use the FLO-FAST pump on industry standard large mouth jugs.
Do not use the FLO-FAST pump on any container that does not fit the FLO-FAST pump.
Part Numbers: 75001, 75002, 75003, 75004, 10501, 10502, 10503, 10504, 15501, 15502, 15503, 15504 Are designed for the FLO-FAST pump and come with a vent inserted into the container. When pumping or drawing fluid with the FLO-FAST pump, you must properly open the vent for a proper venting system. Pouring from these containers can be dangerous and is not recommended.
Do not store jugs outside or in the sunlight
If you are using the FLO-FAST pump with fluids that do not lubricate the FLO-FAST pump, over time you may have to prime the pump if you are trying to draw fluid with a dry pump.
You may need to prime the pump if you are trying to draw or suck fluid from more than 5 feet away. (Each pump comes with 5 feet of hose)
The 5 foot accessory extension is for pumping purposes.
If you are pumping or drawing at a rate more than 60 revolutions per minute you run the risk of over pressurizing the pump.
Questions & Reviews
Customer questions & answers
Can the 10.5 gallon container be transported on its side? Or must it remain standing up?
(From: PDG Team)
Our recommendation is that the containers should be stood up during transportation.
Is the thread the same as a racing jug?
(From: PDG Team)
It is the same thread as most racing containers with a 3-inch opening on top.
Can they be used for potable drinking water (if new and never used for anything else)?
(From: PDG Team)
The containers are made of a plastic that is safe for drinking water. Pumps and other accessories have to be special ordered to be safely used for drinking water. Call 952-934-4505 for special orders.