This Professional Model 15 Gallon System was designed for a variety of fluid and fuel transfer applications including but not limited to the Marine, ATV, Automotive, and Agricultural industries. Pump or draw (siphon) up to 8 gallons per minute with the Flo-Fast pump. This system offers 15 gallons of capacity and is easily transported with your choice of the Fold Flat Cart or the purpose-built Versa Cart. The FLO-FAST™ 15 gallon fuel transfer system is incredibly durable, built to last, and will get the job done fast, safe, and easy. The full system includes a Professional Model Pump, (1) 15 gallon container, and your choice of a Fold Flat Cart or the Versa Cart.
Pumps or draws (siphons) up to 8 gallons per minute (GPM)
Empties the 15 gallon can in under 2 minutes
Pump offers double-seal technology that holds up with all types of fluids, even the harshest chemicals
Pump hose offers industry-leading safety tether which attaches to a vessel or vehicle to ensure hose stays in fluid opening, eliminating spillage
Container holds 15 gallons of fluid
Container is dual handled for ease in transport, grip, and handling
Ultra-durable and long-lasting container is rotationally-molded which gives additional wall thickness throughout
Container has molded-in, female brass insert, combined with male vent valve to provide ample airflow when utilizing the Flo-Fast Pump
Pump housing, container cap, and main draw tube, handle, 5 feet of hose, relief spring, unleaded tank adapter, tether with plug and static line, and draw tube
15 gallon container (jug), cap with internal o-ring, and brass air vent valve
Choice of:Fold-Flat Cart:
Is ideal for hard surfaces and provides compact storage when not in use
Has a 15 inch wide load plate and 5 inch tall tire and wheel
Comes with 2 inch wide elasti-strap to secure the container to cart
Choice of (2) 10-inch or (2) 12-inch tires and wheels that are solid rubber, eliminating any risk of the tires going flat
Has heavy-duty, 15 inch wide steel, detachable load plate that is secured with pin and cotter key
Includes a telescoping handle, 2 wire forms that slide within the aluminum block, and a solid steel axle with 3 inch wide footplate- utilized to tip-back and set down your container
Operating & Safety
Steps the operator must take before Pumping or Drawing any volatile / combustible fluid
If you choose to pump or draw any type of flammable liquid do not use this pump or system around any flame or any type of electrical motor or devise that may cause a spark or static spark.
Always make sure the FLO-FAST pump and the container it is in, is placed on the ground before pumping or drawing any fluid.
Apply static wire clamp to the filler opening to reduce the risk of static.
Do not transfer any fuel with engine running, hot exhaust can ignite fuel.
Make sure the squeeze clamp is applied before transferring fluid. The squeeze clamp is to make sure the hose will stay in the filler opening.
Always keep the hose in contact with the filler opening. (After you have applied the squeeze clamp to the unit that you are pulling fluid from or pumping fluid into, the hose will stay in contact with the filler opening, therefore dissipating any static build up from the pump or system.)
If fuel is being transferred do not smoke or place the FLO-FAST pump or system by any type of flame.
Steps the operator must take when fluid transfer is complete
After a fluid transfer operation, carefully raise the line out of the fluid opening and let the fluid drain back into the system container. Do not set the hose down until all of the fluid has drained back into the container.
To eliminate any person from pumping fluid accidentally, DO NOT store the FLO-FAST pump in any type of portable jug. Always put the pump and system in a safe area where children / others do not have access to it.
Children must not use the FLO-FAST portable fluid transfer pump and system.
Do not transport the FLO-FAST pump while it is in the utility jugs.
After a fluid transfer operation, always remove FLO-FAST pump from container and place the cap on the utility jug.
Do not allow individuals under licensed age to use the FLO-FAST pump or system.
If you choose to use FLO-FAST with any type of volatile fluid like gasoline or methanol or any harmful chemical, do not inhale vapors.
If any component breaks on the FLO-FAST portable fluid transfer pump or system, do not use until you have replaced all of the broken components.
When filling containers at a gas station always place the container on the ground and never fill a container when it is in a trunk, in the bed of a truck, in a trailer, or on top of a vehicle. Do not overfill the container beyond manufacturer’s specified levels to allow for fluid expansion.
You can only use the FLO-FAST pump on industry standard large mouth jugs.
Do not use the FLO-FAST pump on any container that does not fit the FLO-FAST pump.
Part Numbers: 75001, 75002, 75003, 75004, 10501, 10502, 10503, 10504, 15501, 15502, 15503, 15504 Are designed for the FLO-FAST pump and come with a vent inserted into the container. When pumping or drawing fluid with the FLO-FAST pump, you must properly open the vent for a proper venting system. Pouring from these containers can be dangerous and is not recommended.
Do not store jugs outside or in the sunlight
If you are using the FLO-FAST pump with fluids that do not lubricate the FLO-FAST pump, over time you may have to prime the pump if you are trying to draw fluid with a dry pump.
You may need to prime the pump if you are trying to draw or suck fluid from more than 5 feet away. (Each pump comes with 5 feet of hose)
The 5 foot accessory extension is for pumping purposes.
If you are pumping or drawing at a rate more than 60 revolutions per minute you run the risk of over pressurizing the pump.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.