FLO-FAST Professional Model Pump

Price: $219.99$254.99

The Professional Model pump is made of a plastic composite material that is compatible with all types of fluids from water to fuels and most chemicals.

Features & Specs

The Professional Model Pump is designed for recreational fuel and fluid transfer uses as well as commercial applications. Developed from a plastic composite material, the fluid transfer pump is compatible with all fluid types ranging from water and fuels to even the harshest of chemicals. The Professional Model Pump, coupled with our patented technology, is designed for FLO-FAST ™ containers; also all industry-standard, large mouth containers (jugs) with a 3 inch opening. Additionally, the pump can adapt to industry standard 15, 30, and 55 gallon barrels with a bung adaptor. The pump has three internal vanes that build pressure to pump and draw fluid up to 8 gallons per minute. The FLO-FAST ™ pump is ultra-durable, made to last, and will transfer fluids fast, safe, and easy.


  • Pumps or draws (siphons) up to 8 gallons per minute (GPM)
  • As a result empties our 7.5 gallon can in under 60 seconds
  • Corrosion resistant 3 Vane Rotary Pump
  • New Telescoping Draw Tube allows the flexibility to own multiple size containers with the need for only 1 Pump
  • The double-seal technology that in effect holds up with all types of fluids, even the harshest chemicals
  • Shaft runs independently from the internal 3 vane rotor and runs on a bearing to ensure all components turn and stay in alignment; providing a tremendous amount of cycle life
  • Tight tolerances which provide maximum suction and self-priming
  • Container Pump: Fits industry standard 5, 7.5, 10.5, and 15 gallon containers with a 3 inch wide opening
  • Barrel Pump: Adapts to standard 15, 30, and 55 gallon barrels with our bung adaptor
  • Combo Pump: Fits industry standard 5, 7.5, 10.5, and 15 gallon containers with a 3 inch wide opening; Also adapts to standard 15, 30, and 55 gallon barrels with our bung adaptor
  • Pump hose offers industry-leading safety tether which attaches to a vessel or vehicle to ensure hose stays in fluid opening, eliminating spillage
  • Also draws fluid out of a barrel at a rate of 8 gallons per minute. Simply place the hose down into the fluid, and reverse the pump to pull fluid out


Fluid Transfer Pump Includes

  • Pump housing, container cap, and main draw tube, handle, 5 feet of hose, relief spring, unleaded tank adapter, tether with plug and static line, and telescoping draw tube

Operating & Safety

  • If you choose to pump or draw any type of flammable liquid, do not use this pump or system around any flame or any type of electrical motor or device that may cause a spark or static spark.
  • Always place the FLO-FAST system and containers on the ground or dock before transferring volatile or combustible fluids (ex. gasoline).
  • Never pump or draw fluid from a truck bed, boat, utility vehicle, or piece of equipment.
  • To help reduce static spark, the static wire on the pump must be attached to a metal object that is grounded on your vehicle, equipment, boat, utility vehicle or a grounding rod.
  • Do not transfer any fuel with an engine running, hot exhaust can ignite fuel.
  • Before filling any gas tank, turn off the equipment and let it cool down.
  • When you are transferring volatile or combustible fluids, never have anyone in a vehicle, utility vehicle, equipment, boat, or any piece of machinery.
  • Make sure safety tether squeeze clamp is attached to the equipment, utility vehicle or boat before transferring fluid. The purpose of the squeeze clamp is to ensure the hose will stay in the filler opening.
  • Always keep the hose in contact with the filler opening. (After you have applied the squeeze clamp to the unit that you are pulling fluid from or pumping fluid into, the hose will stay in contact with the filler opening, therefore dissipating any static build up from the pump or system.).
  • When pumping or drawing fluid with the FLO-FAST pump, you must properly vent the system. Turn vent counterclockwise (turns into container) to open vent and clockwise (vent turns outward) to close the vent.
  • If you are using the FLO-FAST pump with fluids that do not lubricate, over time you may have to prime the pump if you are trying to pump or draw fluid with a dry pump.
  • You may need to prime the pump if you are trying to draw or suck fluid from more than 7 feet away. (Each pump comes with 5 feet of hose)
  • The 5-foot accessory extension is for pumping purposes.
  • If you are pumping or drawing at a rate of more than 60 revolutions per minute, you run the risk of over pressurizing the pump.
  • Carefully raise the line out of the fluid opening and let any residual fluid drain back into the system container. Do not set the hose down until all of the fluid has drained back into the container.
  • Place plug on the tether line into the aluminum tube to seal the hose.
  • Before removing the pump system from containers, make several counterclockwise rotations to pull residual fluid out of the pump housing.
  • Leave the pump on container for a minimum of 15 minutes to ensure any fluid inside the pump housing drains back into the container.
  • Always remove the FLO-FAST pump from the container and place the original cap back onto the container to properly seal and store fluid.
  • To eliminate any person from pumping fluid accidentally, do not store the FLO-FAST pump in the container. Always return the pump and system to a safe area where children / others do not have access to it.
  • Do not bring the FLO-FAST system or containers onto a boat or any type of marine vessel to transfer volatile or combustible fluids (ex. gasoline).
  • Do not pump or draw any combustible or volatile fluids (ex. gasoline) from container to container when you are standing on a dock or a surface that that is floating on the water. This operation is extremely dangerous due to static spark.
  • Do not attempt to pour any combustible or volatile fluids (ex. gasoline) from container to container when you are standing on a dock or a surface that is floating on the water. This operation is extremely dangerous due to static spark.
  • Transferring or pouring from container to container should never be attempted due to the risk of static spark.
  • Anyone that has a plastic dock must take extra precautions and ensure they have properly grounded their system and their body prior to pumping or drawing combustible or volatile fluids.
  • After use, remove the FLO-FAST system from the dock and return the unit to a safe storage location.
  • Never allow individuals under licensed age to use the FLO-FAST pump or system.
  • Never let anyone use the FLO-FAST system or containers that has not read this instruction sheet in full.
  • Never smoke if fuel or any type of volatile or combustible fluid is being transferred.
  • Never place the FLO-FAST system or containers with volatile or combustible fluids by any type of flame.
  • Do not transport the FLO-FAST pump while it is in a container.
  • Only use the FLO-FAST pump on industry standard largemouth containers.
  • Pouring from these containers can be dangerous and is not recommended with a volatile or combustible fluids. For that reason, we have designed the FLO-FAST pump system to safely transfer these fluids.
  • Do not use the FLO-FAST pump on any container that does not fit the FLO-FAST pump.
  • If you choose to use FLO-FAST with any type of vol1atile fluid like gasoline, methanol, kerosene, or any harmful chemical, do not inhale vapors.
  • When filling a container, always place the container on the ground.
  • Never fill a container when it is in a trunk, in the bed of a truck, in a trailer, boat, utility vehicle, or on top of a vehicle.
  • To allow for fluid expansion, do not overfill the container beyond manufacturer’s specified levels.
  • When transferring volatile or combustible fluids (ex. gasoline) from a bulk source tank or at a station, always touch the container with the dispenser nozzle before removing the container cap to ground the static electricity charge
  • If any component breaks on the FLO-FAST portable fluid transfer pump or system, do not use until you have replaced all of the broken components.

Questions & Reviews

Customer questions & answers

  • Question:

    Can you use 1 pump for gas and diesel ? Need one yellow container and one red container. One pump or 2?

  • Question:

    How much height does this pump and hose add, over the top of the tank?

  • Question:

    Will this be compatible with two stroke mix?


5.00 rating 3 reviews

Customer Ratings

  • Quality of Product
    100% Complete
  • Value of Product
    100% Complete
  • Ease of Use
    100% Complete
  • Effectiveness
    100% Complete
  • Durability
    100% Complete


My Cart




Recently Viewed